AJT Engineering, Inc.
Providing high quality modular cabs installed operationally complete in just 14 days
Cost and efficiency are central to our design and fabrication process. The cabs are fully outfitted by experienced tradesmen in our shop, tested, disassembled and shipped to the project site. The modular nature of our cabs allow for assembly and deployment in the field as soon as it arrives. The design conforms to ICAO and FAA standards as well as meeting the individual needs of each airport. Our team has been designing and building control towers since 1999.
Pre-engineered Prefabricated Airport Traffic Control Tower Cabins
AJT’s team of designers works closely with the airports or authorities as well as the tower shaft designers to glean the requirements of the new cabin. Our experienced architects and engineers have worked together on over 20 ATCT projects worldwide.
Our detailed design and product data are submitted for review and we begin fabrication upon approval.
Our steel framework is fabricated in a controlled shop environment with certified tradesmen. The cab is then outfitted with the exterior envelope with licensed siding and roofing personnel. The glazing and storefront system is installed as well. The interior is outfitted with a multitude of options to include complete console furnishings and raised computer flooring as well as ceiling and dimmable lighting fixtures. Break area sink and appliances as well as isolated equipment electrical circuits and multipoint grounding are other options.
Once completely tested, the cab is split, shrink wrapped and shipped for installation on site.
AJT Prefabricated Cabins
- Nouakchott International, Mauritania
- West Cairo Air Base, Egypt
- Kattamia Air Base, Egypt
- Marsh Harbour International, Bahamas
- Freeport International, Bahamas
- Camp Grayling Bombing Range, Michigan
Cabs built around controllers and their equipment installation
Functioning cab in 14 days once on site
Use as a temporary tower
Inquire about our
$200K USD low budget cab permanent/temporary/mobile
Design of Airport Traffic Control Towers
AJT has been successful in providing 18 high-quality, low-cost designs for Level I airport traffic control tower projects.
An emphasis on sound construction, quality materials and workmanship, and functional capability with budget always in mind. Required standards and spatial relationships are the goals. Tailored to the airport’s needs and budget.
Simple Functional Design — Achieved through the involvement of Authorities and airport personnel, tower operators, experienced staff, and associates in the industry.
Aesthetics — A strong and bold building while incorporating local factors and themes.
Practicality — Provide conventional workspace and equipment that incorporates economy.
Safety — Compliance with line-of-sight criteria, comm equipment requirements, building and fire, and local code enforcement.
Cobb County Kennesaw, GA
Hammond Northshore, LA
Greenwood Leflore, MS
Hernando County, FL
Shuttle Landing Facility, FL
Mesquite Metro, TX
Collin County Regional, TX
Victoria Regional, TX
Rogers Municipal, AR
Ormond Beach, FL
Stinson Municipal, TX
TSTC Waco, TX
New Braunfels, TX
Countless studies and concept designs
Interior Build out
Bare, Partial or Full Interior Build out is available. We provide completely custom plywood/laminate cabinets at a fraction of the steel console price. We can also provide the cab as console ready for installation of the steel consoles.
Size, Configuration and Adaptability
Our prefabricated cabins are available in all sizes. We will adapt to your tower shaft size.
Minimum size of 6m horizontally across flats recommended, 7.3m is our standard (pictured above). We have completed an 8.5m cab and have an 11m cab is in design.
Eight sided cabs are well suited for reflectance. We have provided 4 and 6 sided cabs with a 10 sided unit in design. Our cab design provides a full 360 degree view.
- Multiple glazing options
- Sunshades-Manual or Motorized
- Black Ceiling Tile and Fixtures
- Turret, Strip Holders, Holes and Penetrations exactly where needed
- Wrist Guard Edges, Plexiglas Document Indents
- Base Cabinets Built Out as Desired
- Electrostatic Dissipating Carpet
- Dimmable Pin Spot Light
- HVAC includes quiet efficient slim line systems
- Incorporate shaft HVAC into cab sills
- Isolated Power Panel & Equipment Ground
- Complete accommodation for radio equipment
AJT Engineering, Inc., 200 Willard Street, Suite 2C, Cocoa, Florida USA
Contact Peter Deeks at: +1 321 639 1010 (ofc) | 321 863 2527 (cell)
Email: firstname.lastname@example.org | Web: www.ajteng.com